Glossary Contact us Log in
Search
 
Alcatel-Lucent
*
Software Technology Center Home
Sablime® Configuration Management System
Product Info
Downloads
Documentation
Ordering Information
Support
Lucent® nmake Product Builder
Lucent® Exptools
STC Services
Contact Us
*
Download Sablime® v6.1u2 Updater
 
The following table shows the supported architectures for Sablime® v6.1u2. Select your architecture, and then download each of the four files for that architecture:

  • The sab61u2_<architecture>_update.tar.Z file contains the Sablime® distribution.
  • The update_sab61_to_u2 file is the shell script that performs the upgrade.
  • The whatoutput file contains checksum and "what" output for the files in the distribution.
  • The patchlevel file contains a simple indication of the version and architecture of the distribution.

    Note: Update 2 was patched on June 21, 2006. The small database conversion that was part of the update contained a bug. If you had more than one product in your Sablime instance, the conversion did not fully convert the products other than the initial one.
    If you downloaded Update 2 before June 21, 2006 (15:00 EDT), then you should download the updated "dbconvert" script for your architecture, install it into your bin directory, and re-run it. It will then do whatever parts of the conversion that were not completed the first time.
    If you are downloading the update for the first time, you can ignore the "dbconvert" link. The file within the download package has been updated.

    This Updater is only for users upgrading from v6.1 or v6.1u1 to v6.1u2. All other users should download the full distribution.
    For instructions on installing the Sablime® v6.1u2 update, please see The Sablime® v6.1u2 Upgrade Guide.

    Architecture
    IBM RS/6000, AIX 5.1
    IBM RS/6000, AIX 4.3
    HP 9000/700-800, HP-UX 11.0
    HP 9000/700-800, HP-UX 10.20
    Redhat I686[Intel], Linux 7.2, 7.3, 8.0, 9.0
    Sun Sparc, Solaris 2.5.1, 2.6, 2.7, 2.8, 2.9


    Sablime® v6.1u2 Updater for IBM RS/6000, AIX 5.1

    Compressed: 30 MB
    Uncompressed: 79 MB
    whatoutput
    patchlevel
    sab61u2_rs6k_5_update.tar.Z
    update_sab61_to_u2
    dbconvert

    To download directly to disk, right click on the file and select "Save Target As" or "Save Link As".


    Sablime® v6.1u2 Updater for IBM RS/6000, AIX 4.3

    Compressed: 8 MB
    Uncompressed: 24 MB
    whatoutput
    patchlevel
    sab61u2_rs6k_update.tar.Z
    update_sab61_to_u2
    dbconvert

    To download directly to disk, right click on the file and select "Save Target As" or "Save Link As".


    Sablime® v6.1u2 Updater for HP 9000/700-800, HP-UX 10.20

    Compressed: 35 MB
    Uncompressed: 79 MB
    whatoutput
    patchlevel
    sab61u2_hppa10_update.tar.Z
    update_sab61_to_u2
    dbconvert

    To download directly to disk, right click on the file and select "Save Target As" or "Save Link As".


    Sablime® v6.1u2 Updater for HP 9000/700-800, HP-UX 11.0

    Compressed: 32 MB
    Uncompressed: 70 MB
    whatoutput
    patchlevel
    sab61u2_hppa11_update.tar.Z
    update_sab61_to_u2
    dbconvert

    To download directly to disk, right click on the file and select "Save Target As" or "Save Link As".


    Sablime® v6.1u2 Updater for Redhat I686[Intel], Linux 7.2, 7.3, 8.0, 9.0

    Compressed: 17 MB
    Uncompressed: 35 MB
    whatoutput
    patchlevel
    sab61u2_ilinux_update.tar.Z
    update_sab61_to_u2
    dbconvert

    To download directly to disk, right click on the file and select "Save Target As" or "Save Link As".


    Sablime® v6.1u2 Updater for Sun Sparc, Solaris 2.5.1, 2.6, 2.7, 2.8, 2.9, 2.10

    Compressed: 26 MB
    Uncompressed: 60 MB
    whatoutput
    patchlevel
    sab61u2_sparc5_update.tar.Z
    update_sab61_to_u2
    dbconvert

    To download directly to disk, right click on the file and select "Save Target As" or "Save Link As".

  •  
    Terms of use    Privacy statement   
    Copyright © 2006 Alcatel-Lucent. All rights reserved.