mmWave Relayed Backhaul for Very High User Rate Delivery

  • Du J.
  • Onaran E.

Relay aided backhaul has been proposed to meet the challenge of providing Gbps high user rate over long distance (~1 km) in millimeterWave. The problem of backhaul topology design and optimal bandwidth-power partitioning has been formulated as a constrained optimization problem to minimize the bandwidth consumption for given user rate request. It has been shown that in the 28 GHz band, 1 Gbps user rate within cell range of 1 km is possible for favorable path loss scenarios such as street canyon and urban macro-cell, but less likely under severe path loss as in the 3GPP uMi-NLOS model.

View Original Article

Recent Publications

January 01, 2018

Fair Dynamic Spectrum Management for QRD-Based Precoding with User Encoding Ordering in Downstream Transmission

In next generation DSL networks such as, employing discrete multi-tone transmission in high frequencies up to 212 MHz, the crosstalk among lines reaches very high levels. To precompensate the crosstalk in downstream transmission, QRD-based precoding has been proposed as a near-optimal dynamic spectrum management (DSM) technique. However, the performance ...

January 01, 2018

Practical Mitigation of Passive Intermodulation in Microstrip Circuits

This paper presents new experimental evidence and a novel practical approach for mitigation of passive intermodulation (PIM) in microstrip circuits fabricated on commercial printed circuit board laminates. The mechanisms of distributed PIM in microstrip circuits are reviewed and a phenomenology of PIM generation due to locally enhanced electromagnetic fields at ...

January 01, 2018

Efficient Cooperative HARQ for Multi-Source Multi-Relay Wireless Networks

In this paper, we compare the performance of three different cooperative Hybrid Automatic Repeat reQuest (HARQ) protocols for slow-fading half-duplex orthogonal multiple access multiple relay channel. Channel State Information (CSI) is available at the receiving side of each link only. Time Division Multiplexing is assumed, where each orthogonal transmission occurs ...